Xiamen ruimeng arts & crafts co. LTD

Column:Waste gas treatment Time:2019-07-24
shared:

image.png

Project introduction

The pollution sources in remon workshop mainly come from two parts: 1. Grinding workshop, dust generated during grinding; 2. 2. Paint mist produced when painting handicrafts in the paint shop. On the basis of identifying and analyzing the pollution sources, we adopt different dust removal measures to absorb and treat the dust and paint mist on the spot, so as to prevent the dust and paint mist from spreading to the whole workshop and affecting the operating environment.

Two sets of cabinet type gravity vacuum hoods shall be installed in the grinding workshop. Install a mist hood in the craft paint shop. Install 1 cyclone spray tower and 1 set of adsorption tower on the roof. After treatment, the exhaust gas is discharged to the standard.

Dust removal program description

The pollution source in raymon workshop mainly comes from two parts: the dust produced in the polishing workshop and the paint fog produced in the painting workshop. On the basis of identifying and analyzing the pollution sources, we adopt different dust removal measures to absorb and treat the dust and paint mist on the spot, isolate them from the surrounding air, and make them discharge according to the standards in an organized way. Two sets of cabinet type gravity vacuums are installed in the grinding workshop, with a length of 9200mm, a width of 2000mm and a height of 3500mm. The air volume of a single dust collector is 19800

M /h, installed outside the grinding workshop. Install a fog hood in the arts and crafts painting workshop, length: 80000mm, width: 3000mm, height: 3500mm. Install 1 cyclone spray tower and 1 set of adsorption tower on the roof.